Quote:
Originally Posted by What's_nitro?
I think it's impossible that a controller can outright ruin a motor unless there is a problem with the programming that makes it cog like hell. Which you would obviously notice BEFORE it fried your motor and you would stop driving.....
Definitely make sure the motor screws aren't too long. That has been a common problem around here with the Feigaos. If all is well then just face the fact that Feigaos are cheap and if you overload them they will get really hot and fail. Done. The MMM is not at fault here.
|
I hope you´re right but it did cog quite a lot. The first two packs ran smoothly, no cogging or heating problems at all. Sure, the motor got warm but not that warm. But on the third pack thing changed, at first it was at smooth as before but then suddenly it started to cog. Stopped and tried again and it cogged. Tried one last time and...FIZZZ...
But you´re right, Feigaos are basicly crap, they´re cheap but thats really the only good thing about them
What bugs me is that all three motors I´ve been running with the monster have lasted for about three packs before they´re history. Even the last motor , the previous owner ran the very same motor in the very same car, same gearing and everything exept for the esc and he never had any heating or cogging problems at all, but then when I plug it in to my monster it lasts three packs before it´s dead
Threaded Mode
