F/S Slipperential Revo

[lincpimp]

I hate to part with this truck, but it is just sitting, collecting dust.

This is a revo with a 3.3 length chassis, think it is a 3racing product... Anyway, it has the servos placed farther forward than the 3.3 chassis, which is good as it frees up space to mount the battery trays farther forwad.

I made the side plates out of lexan, and it has emaxx battery trays and holds downs. T-maxx receiver box on one side, and the truck is setup for a single steering servo. It has the blue al proline single sterring arm and an al lower steering arm mount.

Rpm front arms, and the traxxas ext wheelbase rear arms. So with the ext chassis, it is truggy length. It has the traxxas cvds all the way around, and 17mm hexes. Tires are proline Bowtie MTRs, and they are in great shape.

Now for the really cool part. It has a center slipperential. This is a 1/8 scale center diff, with a revo spec slipper assy. They are connected by a custom set of bulkheads. This is idetical in operation to mike's slipperential for the gmaxx chassis. Metalman made this truck, and the center slipperential setup.

I ran this truck with a variety of motors on 4s lipo, and it is great. Very stable due to the long wheelbase, but turns on a dime, due to the center diff. I currently have 50k fluid in the center, that gives a good mix of forward traction, and it still turns very well.

Also has a tekno wing mount, and a rpm front bumper. Truck is in good shape, has some scuffs and scratches from nomal use. Nothing needs to be done to this truck, except put your electronics in a run it!

I will include a well used MGT body. It has the rubber body clip retainers, and is a bit rough, but has plenty of life in it. Great basher body!

Pics below, Please PM me for price!