RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#26)
E-Revonut
RC-Monster RC8T
 
E-Revonut's Avatar
 
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
11.04.2008, 12:39 AM

Well running in grass and weeds is going to put more strain on the setup. I actually found out that grass is our enemy! It puts one of the highest loads on the motor/esc. An 18t pinion will get you 35MPH, but for your typr of running you might want to step it down a touch. 17t = 33MPH, 16t = 31MPH with stock 66t spur. If you can get some different spur gears on there they are generaly cheaper than pinions and if you get a 17t pinion and a little smaller spur for a little extra speed and a bigger one when your mowing over rose bushes that would be ideal. If you don't have a choice of spurs I would still try the 17t and check temps and go from there.

That is also with a 5.8" tire, not sure what your running for tires


RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah
SC10 MMPro 13.5T 2s NeuEnery 5000mah
RC18T Mamba 25/5400kv 2s lipo + 6s NiMh

Last edited by E-Revonut; 11.04.2008 at 12:40 AM.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com