Brushless TTR ST-1

[jsr]

I had the ST-1 for 7 months before I converted it. I actually had almost all the brushless parts already, but didn't have a motor mount. I sent Mike my center diff assembly which he used to prototype the mount now available on his site. The mount came a bit different from what I expected. I planned on the motor to be mounted on the opposite side so I needed to rearrange my initial planned layout, but no biggy. My setup's changed a bit since that shown in the pic. I run a different spring in the rear (Reckward Tuning Extra Hard Progressive springs) and 4s LiPos.

My setup is as follows:

CC Mamba Max ESC
Turnigy UBEC 6V/3A
KD36 -74-06XL 2800kv BL motor

I'm going to be changing the motor to a Hobbywing EZRun SL3674 2350kV and see how that runs on both 4s and 3s.