RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Losi 8ight brushless conversion
Old
  (#1)
DwightSchrute
I'm obsessed with The Office
 
DwightSchrute's Avatar
 
Offline
Posts: 908
Join Date: Feb 2008
Losi 8ight brushless conversion - 04.30.2009, 11:24 PM

So here's the story....I bought a couple of Losi 8ight's on ebay last week to convert to brushless, and since i've never converted a buggy before i got the losi conversions.

here's the chassis I got from ebay:




I got it for 279.00!!! Two days later i saw another one from the same seller and bought another.

I figured getting the full Losi conversion would be my best bet because the company that produced the truck also made the conversion.... i thought they would have the best design. not true at all imo.....


let me just say for the most part, the losi conversion is good, but the motor mounts imo FREAKIN SUCK!!! they make it so you can only gear it to something like an 18 or 19t pinion with the 45t spur. i was WAYYY disappointed because i like doing speed runs.

here's the massive useless mount i got with the conversion:





mounted the way it is, it makes gearing options severely limiting. I sat there looking at it for an hour or so before i decided to basically hack the thing in half to open up some space. here's what the mount looked like now compared to the stock mount:





even after it was mounted, i could gear it up to a 24t pinion, but it just didn't seem like it was very stable anymore. The stock mount almost makes it seem like it angles my neu motor (or maybe it can't support the weight which makes it look like it's sagging in the rear)which i definately didn't like.

So i got on rc-monster and looked at mike's mounts and found his.


I bought one hoping it would be an improvement and it was in a BIG way. So I got another one express mailed to me with a bunch of big pinions. Not only did it fit better, it held the neu motor better and made it more stable. I could gear it through the roof now, and it was definately better for the neu motor. everything was rock solid. here's some pics of it done:







I gotta say thank you to Mike for making a great mount. it was the catalyst that made this conversion work. BTW......these buggies are FAST AS S#IT!!!
I geared it to 45/25 on 6S with ofna steel belted tires and let it rip.

I grinned from ear to ear and was hooked. This was the best investment i've made in 2 vehicles in a LONG time.


8IGHT 2.0 2650KV MMP
8IGHT-T 2.0 2350KV MONSTER MAMBA
LOSI TEN SCTE NOVAK 3700 MMP
B44 MMP TRINITY D3 6T
B4 MMP TRINITY D3 9.5
E-REVO BRUSHLESS EDITION

Last edited by DwightSchrute; 04.30.2009 at 11:36 PM.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com