Brushless Converted Cen Matrix TR

[maxxdout]

Hey guys,

I recently made a deal with someone to trade my brushless B4 for their brushless ready Cen Matrix Truggy roller. You may know this member as Brushlessboy16 and you may have seen his Matrix build in this same section not too long ago

I've always wanted a 1/8th, whether it be a buggy or a truggy, so I am very VERY eager to get this thing going! Shipped out my B4 today so hopefully next week I should have the truggy.

Here's the setup I plan on running. Super cheap, but hopefully it will get the job done...

Feigao 8XL (purchased for $45 shipped from a friend)
http://www.offshoreelectrics.com/pro...-540XL&cat=116

Zippy Flightmax 5000mAh 4s 30c LiPo($80): http://hobbycity.com/hobbycity/store...0mAh_4S1P_30C_

Hobby King 100a ESC($60): http://hobbycity.com/hobbycity/store...idProduct=8993

RC4WD Big Offroader 2.4gHz system($80): http://rc4wdstore.com/product_info.php?products_id=937

The Feigao pulls around 80a continuous so I should be fine with that 100a ESC. The LiPo has more than enough power for this setup so that should also be fine.

Here are some pics of the Matrix TR:







Any comments, questions, or concerns are welcome

Thanks,


maxx