Race weekend.

[zeropointbug]

I am going to a race weekend tomorrow for three days 2 hours away. I have done a few things to make sure I can finish a race without breaking something, modded my Quark with cap bank/thermal pad adhesive. Put the stock dual servos back in, I had a single 645mg in before because of space constraints, and this and that.

So there is the usual practice sessions, qualifiers, and then 30 min MAINS in the afternoon.

Now I am running a 1512/3D(1700kv) running on 6s 4200mah 35C G3 lipo pack, I have not yet timed my runtime yet, as I have to pick up my Hyperion 720i today to fully charge them (have been using programmable power supply @ 4.1v/cell, non-balanced).......so my question is, can I survive the 30 mins main without swapping batteries? These batts are very strong, with almost no voltage drop under low to medium throttle management, so I should get some extra runtime(energy) from the voltage available.

What do you guys think? I have 3 other 6s 4350 25C Enerland lipos I could maybe use, as well as a couple 7s A123 packs... which would be a good option, IMO.