Quote:
Originally Posted by wyattroa
Just double check the pinion is 15 in there..But, this still doesnt make sense to me. The spur that everyone is running in their rc8t is the plastic 46 spur from the electric kit. Castle says to run the 2200kv for a truggy. If the engine got hot all of a sudden on 15 pinion then gearing the pinion down would have made the engine even hotter, am I correct in my thinking?
|
no, gearing the pinion down to about a 11 or 12t will be best for temps on 6s. 15t is still too much for 6s. if you were running 4s, a 15t would be just fine.
They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40.
Threaded Mode
