blown esc

[E-Revonut]

Start by swithing spur gears, Associated does have a 50T plastic spur or you can bump up to a 54t steel spur. For racing I use the 54t spur with a 14t pinion on 4s with the 2200 combo and I get good temps and the speed is just a touch faster than a very well tuned novarossi nitro mill. I did throw a 6s setup in last week to play for a second and it was crazy. My center diff only has 10k fluid but even at about half throttle I could still punch it and wheelie without a problem. Well there is one problem, I need to reglue both front tires!