They do have timing, but its the controller that sets the timing. I think coolhand was talking about the rotors in each motor being in the same position. And in answer to his question - I don't know. Maybe someone else does.
Quote:
|
You'd think if anything, they'd double up on the power wires and use single motor wires since each motor wire will be pulling a fraction of the power at any one time, while the power wire will be pulling the full current. Or use larger guage wire on the power side...
|
That is incorrect, whatever goes into the controller has to come out - whether it be to the motor or in heat. Therefore the current along the power wires will be the same as the current along the motor wires.
Threaded Mode
