More Voltage = Less Amp Draw?

[starscream]

Originally Posted by BP-Revo

Thats ok then. If I set "full brake" as neutral, but my EPA is set to 0, then the controller will still not receive anything further than its percieved maximum full brake, and all should be ok.

Yep, thats exactly how I had it configured and "Beep" the esc would randomly "reset" and off it went to the races and all the while I was doing the WOT dance and trying to get control of my truck back. It was startling to randomly see the wheels turn to pancakes or just flip on its lid as I gave it brakes. The only fix for this was to cycle the power on the esc and let it re-arm itself.

This was quite frustrating as the EPA should have prevented the esc from detecting the brake but unfortunately it did not.
I hope you have better luck than I did.

I'm eager to hear how it goes for you.

captain harlock ygpm