tekin r1mt

[teamtekin]

The Emaxx in the video actually had an R1pro, 4slipo, stock gearing and a 2kv 36mm long can motor. The R1mt will be a beafed version to handle 30 min mains or continuous running. Honestly the R1pro looked like it was going to handling it, without a heat sink. We blew up the motor before the speedo got close to thermal.

All of our speedos will actually work on 5slipo. We rated the R1 and R1pro for 3slipo so we do not have to explain that you cannot use the BEC on higher voltage. With the MT version we intend to offer a seperate BEC module. Groups like this will figure it out. The rest of the world is happy with 3slipo since that is plenty for the vehicles these are really designed for.

I assure you we design our own products. We might peak at the competition to see what they know that we don't. CC does make a fine circuit, but not as good as ours. Tekin has been in this biz for a very long time and has a very nice patent portfolio. Our key employees are engineers, as am I.

No need to be careful. It is your forum and what they are for. We are just visiting and have no problem with earning your support.

Tekin Prez