When for monster maxx?

[Serum]

Differential Ratio: 3.3076923076923075
Transmission Ratio: 2.2
Other Ratio: 1
Spur Tooth Count: 36
Pinion Tooth Count: 20
Total Voltage: 20.4
Motor KV: 1333
Tire Diameter (inches): 6
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0.017
Spur/Pinion Ratio: 1.8 : 1
Total Ratio: 13.09846 : 1
Tire Circumference (inches): 18.85 inches (478.78mm)
Total Motor Speed: 27193.2 RPM
Vehicle Speed: 37.06 MPH (59.53km/h)
Effective Speed Rate: 1.82mph/V (2.92kmh/V)
Effective KV Value: 1333
Motor Torque: Amperage not specified...
Final Torque: Amperage not specified...

[lutach]

Patrick del Castillo sounded so sure when he said something about releasing the MMM in here: http://www.rcgroups.com/forums/showt...=683583&page=5 and still nothing. I've seen people give up on CC MMM and go with MGM and Quark. The MMM should've been out before Summer. Wait a few days and I might post something in here as well as in the Tekin's R1 MT thread.

[kulangflow]

I spoke with someone at Castle yesterday about the MMM. He said the controller is ready to go, but they're having trouble coming up with a motor that's efficient enough to pair with it.

He said they'd like to sell the controller now by itself, but they'd have to find a strategic way to require that you only use Neu motors until they come out with their own. They were even going to have Neu build their motors, but they'd never be able to keep up with demand.

They want to keep up their good warranty reputation, but they don't want to support people using their controller with crappy motors, then having the crappy motors seize up and fry the controller.

Interesting stuff ...

[lutach]

Other controllers have no problem with motors from 2, 4 and 6 poles. The MM worked great with my Align 600L motor and someone is even using a Quark 80with a Align 600XL. To me it seems like a good excuse to go with. Not everyone has the money to buy a Neu motor and they stick with a Feigao for the price. I use feigaos as well and haven't had problems with them.

[crazyjr]

Originally Posted by kulangflow

I spoke with someone at Castle yesterday about the MMM. He said the controller is ready to go, but they're having trouble coming up with a motor that's efficient enough to pair with it.

He said they'd like to sell the controller now by itself, but they'd have to find a strategic way to require that you only use Neu motors until they come out with their own. They were even going to have Neu build their motors, but they'd never be able to keep up with demand.

They want to keep up their good warranty reputation, but they don't want to support people using their controller with crappy motors, then having the crappy motors seize up and fry the controller.

Interesting stuff ...

Honestly they been saying that for two years (since before the MM officially came out) they seem to think we are morons and don't know what we are doing. Well we do overdrive the MM a wee bit hehehe.

[lutach]

Isn't there a law against false advertisement?