Great Planes Ammo for Rustler/ E-Firestorm

[neweuser]

If you go MAxamps (which is what I would go with for bang for the buck), those are hyperion. However, not sure about the Neuenergy...

[sikeston34m]

I ordered a 20 tooth 32 pitch pinion from Mike for the 5mm shaft. Then I got this 36-56-2600kv motor in from Tower. I'm going to try it in an E maxx. I'll let yall know how it works out.

[lincpimp]

I gave the ammo 1800 kv (36/56/1800 )motor a try in my 2wd emaxx on 5s and it got very hot very quickly. It seems to be less effecient than the feigao motor of the same size/spec (15l). Hope that you have better success than I did.

Hold on! Just checked tower and the motor is now selling for $35!!!!!!!!!! I bought mine about 3 months ago for $80. At $35 it is a smoking deal, just gear down and enjoy the savings, slowly!

[sikeston34m]

Originally Posted by lincpimp

I gave the ammo 1800 kv (36/56/1800 )motor a try in my 2wd emaxx on 5s and it got very hot very quickly. It seems to be less effecient than the feigao motor of the same size/spec (15l). Hope that you have better success than I did.

Hold on! Just checked tower and the motor is now selling for $35!!!!!!!!!! I bought mine about 3 months ago for $80. At $35 it is a smoking deal, just gear down and enjoy the savings, slowly!

That's what I gave for this one. I'm sure it will need a heat sink.

What gearing were you using?

I was planning on going 20/76 with this one on 4S Lipo. Think that will work good?

[lincpimp]

Originally Posted by sikeston34m

That's what I gave for this one. I'm sure it will need a heat sink.

What gearing were you using?

I was planning on going 20/76 with this one on 4S Lipo. Think that will work good?

WOW, this make take all of my mental capabilities to remember the gearing!

Definately using a 66 t spur, possibly a 14-16t pinion, not sure. Most of my combos are geared for 40mph though, and I try to keep the motor rpm around 35k. Hope this helps.

I will have the LHS order me a few of these motors, can't beat the price!

[GO-RIDE.com]

Has there been any other testing done with the Ammo motors? I'm hoping to try a 36/56/2600 or 36/50/3300 on 3s with a MamabaMax in my CRT.5.

Right now I'm using a Novak GTB with a 6.5 (5900 kv) on 2s. I don't get any cogging or heat (really), but I'd like more punch for jumps out of corners.

Originally Posted by GO-RIDE.com

Has there been any other testing done with the Ammo motors? I'm hoping to try a 36/56/2600 or 36/50/3300 on 3s with a MamabaMax in my CRT.5.

Right now I'm using a Novak GTB with a 6.5 (5900 kv) on 2s. I don't get any cogging or heat (really), but I'd like more punch for jumps out of corners.

I have both of those motors, but I'm wainting my Maxamps 3s 8000mAh batteries to arrive. I'm going to use those motors in Rustler. I'll let you know how those works, maybe after x-mas.