Neu 1509 motor Question

I think IBJammin runs a Neu 1506 w/MM in his crt.5 with absolutely no cogging. He too has(or had) a full size crt w/MM and Neu 1515 that cogged, but the smaller Neus with MM seem to work fine. I cant confirm this fully though, ask him.....

Bye

[ssspconcepts]

Originally Posted by cemetery gates

I think IBJammin runs a Neu 1506 w/MM in his crt.5 with absolutely no cogging. He too has(or had) a full size crt w/MM and Neu 1515 that cogged, but the smaller Neus with MM seem to work fine. I cant confirm this fully though, ask him.....

Bye

Thanks CG!

NP! Here's the thread, you might want to do a quick read-through.

http://www.rc-monster.com/forum/showthread.php?t=6417

Bye

Hello,
i ran a 1509/1.5d with an MM esc and a 12t pinion in a crt.5 and had no cogging at all, everything was very smooth; if you want something very powerful 1509 is a great choice for the little crt.

[ssspconcepts]

Originally Posted by lilian

Hello,
i ran a 1509/1.5d with an MM esc and a 12t pinion in a crt.5 and had no cogging at all, everything was very smooth; if you want something very powerful 1509 is a great choice for the little crt.

Thanks. I appreciate the information.