Where to buy lehner motors?

[jhautz]

The Hackers are excelent motors IMO. They run every bit as cool and strong as my Lehner and Neu motors. Only downside is the constuction is similar to the feiagos. Pressed end bells so you need to RC-monster heat sink, not to keep it cool, but to keep it from poping an end bell on a big jump.

I put a Hacker B50 10XL in my Xray XB8EC Buggy I just built. It runs stone cold on 5s. I bought mine used as well. I agree with the others, the price for them new is a little out of line. The can on the Lehner and Neu is far superior, but the windings and rotors are top notch. If you run across one for a decent price snag it up.

[BL_RV0]

where could i find one of these hackers at good price?

[lincpimp]

Originally Posted by jhautz

The Hackers are excelent motors IMO. They run every bit as cool and strong as my Lehner and Neu motors. Only downside is the constuction is similar to the feiagos. Pressed end bells so you need to RC-monster heat sink, not to keep it cool, but to keep it from poping an end bell on a big jump.

I put a Hacker B50 10XL in my Xray XB8EC Buggy I just built. It runs stone cold on 5s. I bought mine used as well. I agree with the others, the price for them new is a little out of line. The can on the Lehner and Neu is far superior, but the windings and rotors are top notch. If you run across one for a decent price snag it up.

If you have the room the c50 motors have bolt on endbells and a machined finned can. They are about 42mm in diameter, so they may not fit a emaxx/revo, but seem to fit well with the flat chassis conversions using mike's mounts.