Best way to free up loctite???

[Maxxman]

Something I found out is don't heat up the pieces if one of them is cf as it bends.

[Hickoryhead]

Originally Posted by Maxxman

Something I found out is don't heat up the pieces if one of them is cf as it bends.

Or plastic. It melts. I use the solder gun method. Works like a charm.

[JERRY2KONE]

Good to know since we all use it on our vehicles. I had never run into that scinario of having to remove anything with red locktite. So let us know if that does the trick.