another E-XT8 will be born!!!!!

[suicideneil]

Wow, thats one big truggy. On the length difference, I think if you had the Stealth setup with a higher center ground clearance, that would reduce the length a fair bit probably.

[Sower]

Well, I figured I should get in on the action too, so here's some pics of my XT8. I posted some of them in the other thread too. I got mine on eBay and it had been raced three times. The guy put some nice hop ups on it as you'll see in the photos. It came with the black anodized aluminum front knuckles as well as the rear uprights, all the steering blocks have been replaced with the aluminum ones too. The front chassis brace is aluminum but the rear is plastic. The guy also made some nice CF mud guards that attach to the rear suspension arms. I also have the RC-Monster motor mount and chassis brace on it right now as well as the servo piece. I'm working on a revision to the mud guards so they're not on right now. Well, here it is:

[ClodMaxx]

wow, that's a nice truggy sower! looks like he (or you) added the nice captive hinge pin upgrade in front and back too. the black anno knucks and rear carriers is a nice touch - he must've had the anno done, as i've only seen them in the raw aluminum. and i've seen that mud guard mod in the Xray forum... it's a good idea, and the CF is another nice touch.

that RCM motor and servo mount is nice too! you'd swear it's stock - mike really added a nice touch by making them black anno with silver edges to match the rest of the truck.

looks great!

[yamil]

Are you using the stock factory metal spur?