"Direct Drive to Diff" MT2 18SS

[sikeston34m]

Hey Linc,

The clutch is an idea if you can come up with the mechanical aspects of it. Design I mean. It's a tradeoff since you have to use mechanical brakes though. Just remember, down on the center driveshaft there is MUCH higher torque and higher gearing.

Hey Metalman,

LOL@Crow screaming. That's gotta be strange.

I've never tried an outrunner on 10S A123. I have tried an E maxx Outrunner setup on 6S2P A123 which resulted in stripping the hole in the tranny drive dog. I wasn't jumping or anything. It was from HARD acceleration with a 715kv 3530 5 turn.

Sounds like High Timing works good on that setup.

Can you get us a video of this thing?