New to brushless 1/10 scale. Help!!!!!

[Patrick]

Yeah, from the list of parts it sounds like an e-maxx.

If you want to use the lipos you have I'd recommend a 6s setup. Maybe an MGM or Quark 125 (some people's quarks haven't worked properly on 6s, but mine works normally), and a neu 1515 1.5y (1500kv). Gear that for ~40mph for normal driving, and temps and runtime should be pretty good.
I wouldn't use any of the lightened traxxas shafts with brushless, they're not as strong as standard. Diffs will also need upgrading with that setup.

[pizzaman]

Yes it is an E-maxx. Sorry I left that out. I would like to wire the lipos in parrallel if possible. Are the RRP maximizer diffs not up to the strain of the brushless?