Help! I'm a Girl and Know Nothing About r/c!!

[the.wert]

drilling a few holes is nothing :P i used to build robots for a high school team, they had cnc and everything, if they were up and running now i'd sell my own conversion kit :P

so which lipo's would work with the Feigao nicely?
and how much better is this 'mega motor' it looks a lot bigger, and is about twice the price..

[lincpimp]

Any 20c rated lipo will do the job, preferably 5000mah or higher.


The tekn kit does not require any holes, but you would need to convert over to a single servo for steering. You could also buy a RCM motor mount, and just buy the tekno battery tray and straps. I like the tekno esc mount as it gets the esc out of the way. With an 8xl you could lock the revo in second gear and then use the motor to brake and have reverse. Pulling open the tranny is not bad, just have an exploded diagram handy for reassembly. If you have built robots this should be a walk in the park!

[starscream]

Originally Posted by the.wert

drilling a few holes is nothing :P i used to build robots for a high school team, they had cnc and everything, if they were up and running now i'd sell my own conversion kit :P

so which lipo's would work with the Feigao nicely?
and how much better is this 'mega motor' it looks a lot bigger, and is about twice the price..

The mega motors are much better than feigao.
The Acn22/45/1 is only around $175, is 6 Pole and would be a killer on 4S

You'd have to contact Mike to order it as I don't see it in the store.

What ever motor you get will only be as powerful as what your batts can provide so Flighpowers or neu energy lipo's will provide 20-30C (plenty of power for 4S)