A new toy for me!

[sikeston34m]

Originally Posted by suicideneil

Got pics? I wonder if the width of the new mounting points is okay, and it just requires 4 new holes drilled onto the chassis (mount it ontop, rather than underslung).....

Ok Neil, here ya go partner.

Check out the pics. You can see the 4 tranny mount bolt there on the underside of the chassis. Bolts are 41mm x 52mm center to center.

[BL_RV0]

Differential Ratio: 2.8461538461538462
Transmission Ratio: 1.83
Other Ratio: 1
Spur Tooth Count: 38
Pinion Tooth Count: 14
Total Voltage: 22.2
Motor KV: 1700
Tire Diameter (inches): 4.5
Tire Ballooning (inches): .5
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 2.71 : 1
Total Ratio: 14.13725 : 1
Tire Circumference (inches): 17.28 inches (438.88mm)
Total Motor Speed: 37740 RPM
Vehicle Speed: 43.68 MPH (70.17km/h)
Effective Speed Rate: 1.97mph/V (3.16kmh/V)
Effective KV Value: 1700
Motor Torque: Amperage not specified...
Final Torque: Amperage not specified...

the tires would be panther komodo's

[lincpimp]

You may have clearance issues with the motor and tranny with the small spur and pinion.