200A, 14S lipos ESC to come!!!

[aqwut]

yeah... those are some good escs according to the specs... that's a lot of power for a small scale RC.. but it's awesome to have a 1/18th scale rc running 22.2 volts...

[lutach]

Originally Posted by aqwut

yeah... those are some good escs according to the specs... that's a lot of power for a small scale RC.. but it's awesome to have a 1/18th scale rc running 22.2 volts...

The small ESC says to use up to 3S lipos with BEC and to desable it for 4-6S lipos. Man I tried this little monster with a 5S 3850mAh TP to see if it could handle it. Well it does and the Mamba 8000 motor's shaft broke. This will be the ESC I will use in a micro to try and set s speed record. I might buy a Recoil to do this.

[tashpop]

Originally Posted by lutach

The small ESC says to use up to 3S lipos with BEC and to desable it for 4-6S lipos. Man I tried this little monster with a 5S 3850mAh TP to see if it could handle it. Well it does and the Mamba 8000 motor's shaft broke. This will be the ESC I will use in a micro to try and set s speed record. I might buy a Recoil to do this.

i had a recoil running a wraith7k/quark 33a. i loved how that car handled the power. i miss it now that it hit ebay to fund other projects. i think i seen a pro version coming out so i might have to get one of those again to fill the loss i feel.

[lutach]

Originally Posted by tashpop

i had a recoil running a wraith7k/quark 33a. i loved how that car handled the power. i miss it now that it hit ebay to fund other projects. i think i seen a pro version coming out so i might have to get one of those again to fill the loss i feel.

I own a few Quark 33A and 22A and they are good, but this 40A controller goes a step further with the 6S lipo and 7S A123 capability.

[BL_RV0]

what i think would be cool is
one of these
http://www.atomicmods.com/Products/E...FRpdagodVmMrXg

your esc, lutach.

2 of these
http://b-p-p.com/proddetail.php?prod=j_%23TP2000_11.1

and this (maybe, 6s might burn it up, but for $19, who cares )
http://www.hobbycity.com/hobbycity/s...idProduct=5379

[lutach]

Originally Posted by BL_RV0

what i think would be cool is
one of these
http://www.atomicmods.com/Products/E...FRpdagodVmMrXg

your esc, lutach.

2 of these
http://b-p-p.com/proddetail.php?prod=j_%23TP2000_11.1

and this (maybe, 6s might burn it up, but for $19, who cares )
http://www.hobbycity.com/hobbycity/s...idProduct=5379

I have the Align 430L that I want to try with around 4S. I love that Atomic conversion.

[magudaman]

I noticed earlier you mentioned HV for electric vehicle stuff. That is an additional market you guys could grab if you went over 12s. I currently run 25s 4p A123 cells but only at 25 amps on a bike. Some other guys online are running 30s with around 80 amps. Everyones major complaint in that community is the lack of high current brushless controllers. So put something out. The popular FET in that community is IRFB4110 100v 180a peak. I love my RC but would love to have some more power so I could basically ride my RC.