How do I use mech. brake w/ tekno conversion?

[raptor50]

OK,, I dont know why its not working but here what I did.

Im using 2 2S 4000 to make up 1 4S in series.

I did what was told to me and nothing works now.. I took out the red wire from the esc and put that into channel 2, and bec into channel 3. Now, nothing works. Before when I took out the red wire, I put the esc plug on channel 2, and bec on channel 3 plug, and everthing worked except that i didnt know where to put the brake servo wire. When I got the Bec, the cover showed to put the esc into 2, and the bec to 3 w/o any ommission of the red wire in channel 2. When I look into CC website, it shows to take out the red wire in the ESC plug.. Now im confused.. here are the pics..

http://www.rcmonster.com/forum/showthread.php?t=9375



any help is appreicated.. thanks,