Which lipo to go with?

[Arct1k]

Why not a nue hardshell 5000 25c one?

[lincpimp]

Have a look at this:

I run the 3s2p version in my ext crt.5 and it fits great. Still allows room for the mm behind the battery too. I get great runtimes, at least 30mins, mixed bashing!

Originally Posted by Arct1k

Why not a nue hardshell 5000 25c one?

Well, I would like to stick with flightpower/trackpower because I can get them at my lhs; since I work there, I can get a discount.

Originally Posted by lincpimp

Have a look at this:

I run the 3s2p version in my ext crt.5 and it fits great. Still allows room for the mm behind the battery too. I get great runtimes, at least 30mins, mixed bashing!

I really don't like maxamps at all. I'm running a maxamps 2s 4Ah lipo now and it can barely handle 60amps.(voltage drops to 3.1v/cell)

I think I'm gonna drill some holes in the chassis to make room for some of the longer flightpowers.

Bye

[lincpimp]

Originally Posted by cemetery gates

Well, I would like to stick with flightpower/trackpower because I can get them at my lhs; since I work there, I can get a discount.


I really don't like maxamps at all. I'm running a maxamps 2s 4Ah lipo now and it can barely handle 60amps.(voltage drops to 3.1v/cell)

I think I'm gonna drill some holes in the chassis to make room for some of the longer flightpowers.

Bye

I know what you mean about the 4ah packs, they only work well in a 2p configuration, or 4s and higher setup. I have had alot of success with my 2100 cells, I ran 2 2100 3s packs in parallel in my emaxx with a 380c 7l motor. It was geared for 45 and they could delive under that load. The motor and esc got hot, but the lipos stayed just warm. I am sure the flightpower are better packs though.

[rchippie]

Originally Posted by lincpimp

Have a look at this:

I run the 3s2p version in my ext crt.5 and it fits great. Still allows room for the mm behind the battery too. I get great runtimes, at least 30mins, mixed bashing!

James is that with the stock strap or the optinal one ?. Thank's

[lincpimp]

Originally Posted by rchippie

James is that with the stock strap or the optinal one ?. Thank's

Hey Mike, I use the stock strap and put some small al spacers under the posts. They look to be about 10mm tall, I also have a piece of velcro under the batt to keep it in place. With the spavers the top hole in the post is in jst the right place to keep it all tied down tight. The battery does get close to the spur, so I just taped a think piece of sheet steel to the pack in case it gets moved towards the spur. Very happy with these cells, I think that they are maxamp's best.

[rchippie]

Originally Posted by lincpimp

Hey Mike, I use the stock strap and put some small al spacers under the posts. They look to be about 10mm tall, I also have a piece of velcro under the batt to keep it in place. With the spavers the top hole in the post is in jst the right place to keep it all tied down tight. The battery does get close to the spur, so I just taped a think piece of sheet steel to the pack in case it gets moved towards the spur. Very happy with these cells, I think that they are maxamp's best.

Thank's james mike said the same thing today about these cells.