Power supply for Hyperion EOS0610i??

[YogyBrushless]

that thing about the volts got me worried coz my superbrain power supply gets 15.3v out, and the manual of the 1210i they recommend a powe supply that has 11-15v range :( if it doesnt work i will do the pc power supply conversion

Yousef

[magudaman]

my 1210i will accept all the way down to 10.2v then get a low battery warning and shut down the charge. I have never tested the upper limits though. 0610 will take anything from 11-28v input.

[YogyBrushless]

Originally Posted by magudaman

my 1210i will accept all the way down to 10.2v then get a low battery warning and shut down the charge. I have never tested the upper limits though. 0610 will take anything from 11-28v input.

thanks man, if the 0610i takes that range of volts i`m sure the 1210i will do the same. i`m gona go order later today.


Yousef

[magudaman]

Originally Posted by YogyBrushless

thanks man, if the 0610i takes that range of volts i`m sure the 1210i will do the same. i`m gona go order later today.


Yousef

Unless they have updated them, the wide voltage range is something that is only in the newer units. The 1210 manual still say it only runs on 11-15v and they would have advertised it if it took more. That is sort of a feature. The 1210 is actually an older charger than the 0610i.