My HV Outrunner REVO

[jhautz]

Looks nice! I like th red chassis.

Are those 2x 4s packs wired in series for 8s 2500mah or parallell for 4s 5000mah?

[BL-Power]

The packs are wired in series for 8s 2500mah. You can also see the pics here: http://picasaweb.google.de/Brushless...xxasRevoSetup2

The red chassis is really nice, i bought the Revo as a roller from skellyo before Christmas. I'll make a small video soon, but here in Germany it is raining since yesterday evening....

The Kontronik/Tunigy combo is really cheap but working so great that i'm thinking about buying a CRT.5 and convert it also using a Turnigy Outrunner and a Kontronik ESC. I've never had a setup that ran that smooth.

[lincpimp]

I like the idea, kind of like Sikeston34m's original emaxx trannys. What would you say your top speed is on this, and what is the motor kv? I may have found a use for my knotronik jaxx esc that I have. It is the 40 amp model and will handle up to 25v, so it would be a good 6-7s controller. I may have to try something like this, for my racebomb chassis emaxx.

[lincpimp]

This setup is not slow, check out the calc:

Differential Ratio: 2.8461538461538462
Transmission Ratio: 1.7222222222222223
Spur Tooth Count: 1
Pinion Tooth Count: 1
Total Voltage: 29.6
Motor KV: 500
Tire Diameter (inches): 5.75
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 1 : 1
Total Ratio: 4.90171 : 1
Tire Circumference (inches): 18.06 inches (458.83mm)
Total Motor Speed: 14800 RPM
Vehicle Speed: 51.65 MPH (82.97km/h)
Effective Speed Rate: 1.74mph/V (2.8kmh/V)
Effective KV Value: 500

Definately not a slouch, thats for sure!

[BL-Power]

Yeah, it is really fast and powerful. I can't go full throttle longer than one second because my Crime Fighters are balooning so bad that i can't control my car. Does anyone know some tires that don't balloon that much? The highest speed my GPS recorded was 69km/h. Your Jazz 40 should work really nice with an Outrunner on 6s Lipo.

Could you tell me how you can use a Jazz 55-10-32 controller on a monster truck???
55 Amps is not realy high, and you just use 14.8 volt.

Why all guys here try to buy top notch high amps controller like MGM 16018 if the little Jazz can run the revo.

And another question, can i use this little jazz with a Neu 1515 1Y on 4s li-po??????????

[skellyo]

Originally Posted by david lamontagn

Could you tell me how you can use a Jazz 55-10-32 controller on a monster truck???
55 Amps is not realy high, and you just use 14.8 volt.

Actually, he's using the batteries in series for 8s, not 4s.