remove red wire?

[bdebde]

Originally Posted by Topspeedtimmy

How do you turn off the BEC, just take out the red wire from the ESC?

That's it.

[Matthew_Armeni]

Aren't Novak's wired a little differently? I remeber reading in their instructions for their HV Maxx controller that if you run a single pack (like a 12v or a 4s) you can't turn on the ESC when you run it, otherwise you'll burn up the ESC. You have to run an external ESC or rx pack. Never mentioned unplugging the red wire, although I'm assuming that this would work too.