Locking the revo in 2nd gear to use motor braking/reverse

[thetick]

So only one of the pins need this mod? Where do I get more of those FOC pins? Thanks!

[offroader]

Originally Posted by thetick

So only one of the pins need this mod? Where do I get more of those FOC pins? Thanks!

You'll need 2 pins for each shaft you need to mod.

[thetick]

Originally Posted by offroader

You'll need 2 pins for each shaft you need to mod.

Need to know how many shafts need the mod. I can do the math from there.

[offroader]

I believe BrianG said the input and output shafts should modded.

His quote
Those pins replace the ones currently in the tranny. There are two places where these go; on the input gears (blue ones in the pic in the first post), and on the output gear that is on the output shaft. These pins secure the gear to the shaft.