MGM Low Voltage Cut Off - Owners READ - RC-Monster Forums

lutach · 03.05.2008, 05:36 PM

Quote:

Originally Posted by Topas

This is the way I cured the problem too. (I set the brake to very hard1)

I will inform mgm about that issue - I am sure they will fix it fast !

Grisa will find that interesting as it will be the second e-mail regarding this LOL. I'm going to try it now and see what happens.

Topas · 03.05.2008, 05:44 PM

Quote:

Originally Posted by lutach

Grisa will find that interesting as it will be the second e-mail regarding this LOL. I'm going to try it now and see what happens.

That is interesting because I am using already the new version 3.21 !

lutach · 08:14 PM

Quote:

Originally Posted by Topas

That is interesting because I am using already the new version 3.21 !

I made a video of the problem and I'm going to upload it in youtube.

Here are the settings I have now:

A: 3
B: 5
C: 1
D: 1
E: 1
F: 6
G: 1
H: 1
I: 2
J: 1

03.05.2008, 08:40 PM

Try to put the "Automatic correction of neutral" at YES and try it again.

And as i can see, with the newer version, we have the "No Brake" option?
That's good when we use mechanical brake!!

lutach · 03.05.2008, 09:26 PM

Quote:

Originally Posted by david lamontagn

Try to put the "Automatic correction of neutral" at YES and try it again.

And as i can see, with the newer version, we have the "No Brake" option?
That's good when we use mechanical brake!!

Actually I just double checked the check marks on the manual and I have H as YES. I sent an e-mail to Mr. Grisa and I will wait to see what he'll say and I also sent him a link to this thread.

Topas · 12:10 PM

Look at this funny current values ;)

If my eagletree logger is correct, the max current was 89 A ... (10 samples per second)

300A or 180A is impossible for my old 14cell nimh !

lutach · 03.06.2008, 12:39 PM

Quote:

Originally Posted by Topas

Look at this funny current values ;)

If my eagletree logger is correct, the max current was 89 A ... (10 samples per second)

300A or 180A is impossible for my old 14cell nimh !

That is something. I received an e-mail from Mr. Grisa and he said for me to set the neutral range at 12%. That didn't work. I will make a new video of everything from programming to the problem.