Hardened Mod1 Pinions

[othello]

Due to some flex of my motor mount and power peaks up to 2.5Kw my hardened pinion lasted only for 20 runs in a 11lbs truggy. The tooths cut off from a nitro clutch bell withstood about 80 runs under the same circumstances. I have now stiffened up my motor mount.

using a hardened pinion is the same as what comes on every 1/8 buggy/truggy out there, if gear mesh is spot-on it will last for a good while

[lutach]

I had a 48T steel spur in my MBX5T, no problems at all with my hardened pinions.