Plettenberg vs. Neu?

[rhylsadar]

hi

yeah very difficult to say. i have no experience with a big maxx on 6s. however any motor with around 2200 rpmv seems a bit 'hot' on 6s regardless of being a pletti or NEU or whatever. the 1521 1y seems to be more in the 'normal' area for that voltage.

bye
rhylsadar

[lutach]

Between 1500-1800 seems to be the Kv range that will work good in a 6S set up. Some people do run a good quality motor beyond that though and have good luck.

[bdebde]

Originally Posted by Serum

I wouldn't advice to use a bigmaxx on 6S.

Originally Posted by rhylsadar

hi

yeah very difficult to say. i have no experience with a big maxx on 6s. however any motor with around 2200 rpmv seems a bit 'hot' on 6s regardless of being a pletti or NEU or whatever. the 1521 1y seems to be more in the 'normal' area for that voltage.

bye
rhylsadar

Originally Posted by lutach

Between 1500-1800 seems to be the Kv range that will work good in a 6S set up. Some people do run a good quality motor beyond that though and have good luck.

I ran a Big Maxximum (2300kv) on 6s for a while, but it is just too crazy. I got tired of having to go after it to flip the thing back onto the wheels all the time, and that is with a center diff. I have since put a Neu 1515 2.5D (1700kv) in the rig and it has more than enough power to run circles around a nitro, and still back flip onto its lid occasionally.