RC8 Brushless Discussion

[Cain]

I decided to go with the RC Product Designs full conversion. I like how the RC Monster mount is anodized, but I like the gearing ranges of the RCPD mount better.

My setup should be along the following lines:

RC8 Factory Team
RC Product Designs RC8 Conversion
PolyRC PQ6000XP 4S 25C Lipo Battery
Neu 1512 2.5D Motor
Modified Mamba Max ESC w/ RC Monster BEC

For pinion ranges using the supplied modified 46T spur gear, I am looking to go with a range of 16, 17, and 18T pinions for now based on how well 16T with the 44T spur has worked for pipeous. difference on my calculations should only be a 1tooth increase when using the 46T spur.

As for leakage from the diff, from my reading there could be some slight gear flex, or, over filling of the diff.