kb45-540 mount adapter 30mm-25mm

[lincpimp]

Pinions can be found on sdp-si, but they are not hardened. The mount adapter was by bl-power, he sent me one, but it was too thick, not enough of the shaft was left to secure the pinion to.

I removed the front endbell, unscrewed it. Then drilled and tapped it for m3 screws in the std bolt pattern.

Originally Posted by lincpimp

I removed the front endbell, unscrewed it. Then drilled and tapped it for m3 screws in the std bolt pattern.

I did the same and works great.