MGM Low Voltage Cut Off - Owners READ

[ncalenda]

do you have another motor around? Try that to see if it clears up the problem, I had that happen and the motor was bad.

Also, try to auto-tune, but you may have already tried that.

[lutach]

Originally Posted by ncalenda

do you have another motor around? Try that to see if it clears up the problem, I had that happen and the motor was bad.

Also, try to auto-tune, but you may have already tried that.

The motor is not bad. I'm using it without an issue with my Sculze 40.160.

Have you try to change the neutral zone on the controller? Try to put an higher number....Sound like you r controller don't see the neutral zone between the change from fwd to rev.

[lutach]

Originally Posted by david lamontagn

Have you try to change the neutral zone on the controller? Try to put an higher number....Sound like you r controller don't see the neutral zone between the change from fwd to rev.

Yes, that was one of the first thing Mr. Grisa asked me to do. I might just send the controllers to MGM and get the latest FW.

Why?? you don't have the new SW in it now?

[lutach]

Originally Posted by david lamontagn

Why?? you don't have the new SW in it now?

Got it a while back.