NJ/NY/PA Drivers

[Finnster]

Originally Posted by highflier

I'll think about it. I am running 6s A123 (About 1/2 the voltage of the 10S guys)
Stock shocks, Wanderer motor, and a bunch of RPM stuff. The biggest issue is most likely the Suspension and where the weight is. I thought about coming just to learn and get some advise on easy improvementS to my truck. I have not run any of my equipment on a real track yet. Unless you count 15 years ago when I had a P.O.S. bandit that could barely make it around the track (No slipper or anything!!)

I'll watch and see what this develops into.
Highflier

NP, just to note tho, @ the RCM Bash I ran a 8xl/4S/MM combo on a mostly stock Revo, and if anything it was too fast. My 2nd race I used the Revo 2spd and barely got out of 1st gear. As long as you can make a 10 min run and do 30mph you are set.

[Finnster]

Here was a race w/ the nitro MTs from the 07 Bash. My suspension was HORRIBLE. I ever raced before and just bashed, and the setup was so screwed up for the jumps. I could not land on my wheels lol.

Had fun regardless, learned alot about racing, and figure out what I needed to start doing with the truck to make it right on the track. Came back a few weeks later at the RCMTRA's, raced some nitro Revo's, and actually led a few laps...ended up in 4th place as I was a rook and made a lot of errors, but the learning and experience is priceless. I urge anybody to go just to have fun and not worry about doing good or looking like an idiot. I certainly did 1st race and still came out fine.