Another Brushless Revo Project

Originally Posted by MacII

How is the side to side weight balance with that huge battery on there?

Im not sure of the specific weight but it is a bit heavier on the battery side

Just in case anyone is still watching this thread.....here is a little update.

first of all.....converted revo is great...sooo glad i did it. Only problems I have had so far
is one broken tekno clutch adapter.....and a broken clutch bell.

I upgraded to a 8xl which is performing great....all temps are down......
and just got the Monster Mamba but its not in yet....

quick question where did you get the feiago i cant find them anywhere
thanks

[TDC57]

Cool Vid Fore106..

The slow-mo back flip was fun to watch...

I'm glad to see you've having fun with your new truck and it's performing up to par

Nice..

Originally Posted by e-rev project

quick question where did you get the feiago i cant find them anywhere
thanks

You can buy one here on RC-Monster.

http://www.rc-monster.com/proddetail...WAND_XL&cat=20

Great truck, Fore. I was thinking of running the same battery or maybe 2 2 cells at 6400mah in series to have even weight distribution when my ERevo RTR arrives.

Question: How could I run the same battery but not have it so prone to wheelie? Would moving up to a 10xl motor do it?

[BrianG]

Welcome to the forums!

The best way to prevent wheelies is throttle finger control. Or, try increasing the punch control on the ESC for a less aggressive start. Or use a center diff, but that can be tough to tune right.

Originally Posted by Django

You can buy one here on RC-Monster.

http://www.rc-monster.com/proddetail...WAND_XL&cat=20

Great truck, Fore. I was thinking of running the same battery or maybe 2 2 cells at 6400mah in series to have even weight distribution when my ERevo RTR arrives.

Question: How could I run the same battery but not have it so prone to wheelie? Would moving up to a 10xl motor do it?

I have tried all of the suggested methods of keeping the front end down, (gearing up, installing a CD, and increasing punch control in the ESC settings), I have also put some lead fishing weight in the nose, this is fine if you arnt racing (I have used zip ties and shoe goo to install)

Brian is right......finger control is the best way to keep the front end down. I intalled the Monster Mamba the other day and ran it with stock settings just to check it out. I had a hard time NOT flipping over. I increased punch control to 50%....still would wheelie at will.
thats with a center diff. Diffs are 30k/500k/10k. I was flying around the track today.

bottom line is.....its all about throttle control