RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Joe Ford
Castle's Chaos Corner
 
Joe Ford's Avatar
 
Offline
Posts: 135
Join Date: Aug 2006
Location: Olathe, KS
05.14.2008, 12:18 PM

Quote:
Originally Posted by nativepaul View Post
Good NiMhs are capable of that and more, holding reasonable voltage while doing it, just not for long, F5B flyboys were pulling over 300A from NiMhs in 3 second bursts before they switched to LiPos and boat and pylon guys were pulling close to 100A continuous, but at those levels your lucky to get half a dozen decent runs out of a pack before it either significantly drops capacity and voltage or goes pop.
100% correct...I'm one of those pylon guys...100A continuous plus in my F5D's...the batteries get about 10 cycles and then I throw them away. Same for the F5B guys. :)

For "getting away with batteries that handle less than 75A", NO, DO NOT DO THIS. If the controller fails due to ripple current we can't cover it under warranty, and you may lose your batteries in the process. Better to buy expensive, buy once.


Joe Ford
Product Specialist
Castle Creations

Last edited by Joe Ford; 05.14.2008 at 12:19 PM.
   
Reply With Quote
Old
  (#2)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 12:23 PM

Quote:
Originally Posted by Joe Ford View Post
100% correct...I'm one of those pylon guys...100A continuous plus in my F5D's...the batteries get about 10 cycles and then I throw them away. Same for the F5B guys. :)

For "getting away with batteries that handle less than 75A", NO, DO NOT DO THIS. If the controller fails due to ripple current we can't cover it under warranty, and you may lose your batteries in the process. Better to buy expensive, buy once.
Is there any way to overcome this issue with the ripple current?
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#3)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.14.2008, 12:29 PM

Quote:
Originally Posted by lutach View Post
Is there any way to overcome this issue with the ripple current?
The only way I can think of is more capacitance. But it gets physically difficult to mount more so near where they need to go...
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#4)
lutach
RC-Monster Dual Brushless
 
lutach's Avatar
 
Offline
Posts: 5,139
Join Date: Sep 2006
05.14.2008, 12:53 PM

Quote:
Originally Posted by BrianG View Post
The only way I can think of is more capacitance. But it gets physically difficult to mount more so near where they need to go...
Cool, that's what I thought, but needed to be sure. That works for me then. Thank you Brian.
  Send a message via MSN to lutach  
Reply With Quote
Old
  (#5)
rcmonkey
Team Thermal Racing
 
rcmonkey's Avatar
 
Offline
Posts: 74
Join Date: Feb 2008
Location: Antrim, UK
05.14.2008, 12:46 PM

Quote:
Originally Posted by Joe Ford View Post
100% correct...I'm one of those pylon guys...100A continuous plus in my F5D's...the batteries get about 10 cycles and then I throw them away. Same for the F5B guys. :)

For "getting away with batteries that handle less than 75A", NO, DO NOT DO THIS. If the controller fails due to ripple current we can't cover it under warranty, and you may lose your batteries in the process. Better to buy expensive, buy once.
Hmmm I have just seen your post, will 1p A123 packs work?


My Rides:
Tamiya Dark Impact - Team Losi Micro B - Cen Mini Madness - Soon to be BL Xray XB8 TQ
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com