no more li-saver - what lvc?

[BrianG]

The LVC in the link is actually a very good idea! Monitoring each cell individually ensures you don't totally kill a slightly weaker cell. Of course, this means you are connecting to the balance connector of the battery rather than the main line, but that's no big deal IMO.

A couple of considerations:

- Make sure that the balance plug wiring on your pack matches what the LVC wants to see. Chances are, the LVC wire order is sequential (makes sense), but some battery taps need to be re-ordered. Or, use an adaptor of some kind.

- If using dual packs, you'll need to make a Y balancer harness so the LVC can monitor both packs as one. The diagrams on the lipo page of my site can help with that, but use the diagram style where you are using the main harness too, but you won't actually be using the main charge harness since the main ESC Y cable does the same thing.

My CommonSenseRC balancer works great, so I see no reason why that one wouldn't be just as good...

[ClodMaxx]

thanks brian. i'm finally migrating from a123 packs to lipo and haven't purchased a lipo pack yet, but will probably go with a NeuEnergy pack. a 5s2p set of a123 batteries don't fit well in a xt8 truggy.

as for making sure the balance plug wiring matches what the lvc wants to see, wouldn't this take care of that? or is it wishful thinking on my part? lol

'CellShield installs easily between your receiver and ESC. Simply plug the battery port on the CellShield into the tap connection on your battery, and it will automatically detect the number and cell order for any pack with .1 tap spacing.'