Mamba Monster dead?

[JerryF504]

Originally Posted by TexasSP

I just got the same call from Chris that said mid June and mine was not fixable. I don't really understand why, as mine did not have a catastrophic melt down, it just quit working. I sent a note to Joe and am awaiting an answer.

I got the same call yesterday and sent an email to Joe last night, but he hasn't replied yet. They said it wouldn't pass the test so they were going to scrap it. I'm sooo bummed.

[macr0w]

Yeah, I got the call today as well. The girl said it could not be repaired.

I could have told her that. You could take one look at mine and guess it was not going to be repaired.

It was a melted blob of plastic and some loose wires in the box.

I'm thinking about buying another one before mine gets back.

Is that a dumb idea? Maybe it'll last a few rounds like the last one.

[e-mike]

now its time for me to have some problem...symptom...the esc cut and the light of my receiver blink(spektrum)i turn the mmm off and when i turn on it work like new

i run my my today with a 8000mah maxamp today and no issue at all

later i run with 4000mah hecell 25c for the first time and ive got this probleme

tomorow i will re-test with the 8000mah maxamp

my set up...4 cell lipo
feigao 9l
mmm

[lincpimp]

Any reasons why they cannot be repaired? Are the boards crapping out, or just a bunch of components that are not worth replacing?

[e-mike]

wtf..im tired my mmm cut constantly (when i run about 5 min)just give a small blow on it and he reset ,then he run without issue for 5 min more i think im on the borderline before the death of my mmm

i buy it from mike...should i could ship directly to cc or mike???or really wait for the complete death of the esc???

and what is the adress of cc..

[glassdoctor]

Originally Posted by e-mike

wtf..im tired my mmm cut constantly (when i run about 5 min)just give a small blow on it and he reset ,then he run without issue for 5 min more i think im on the borderline before the death of my mmm

i buy it from mike...should i could ship directly to cc or mike???or really wait for the complete death of the esc???

and what is the adress of cc..

You need to send it to CC... info on their website: www.castlecreations.com

[JerryF504]

Originally Posted by lincpimp

Any reasons why they cannot be repaired? Are the boards crapping out, or just a bunch of components that are not worth replacing?

All she would say is that it couldn't pass the test so they were going to scrap it and I would get a replacement mid-June. I'm hoping Joe will be able to shed some light as to what the problem actually is. Mine was not melted like some of the others so I thought it was going to be a fairly simple fix.