MMM Temp without Fan?

so if we open MMM's Esc case out , it means wanranty is void, isn't it?

[killjoyken]

Originally Posted by finfin

so if we open MMM's Esc case out , it means wanranty is void, isn't it?

I highly doubt it since you're just removing the sticker and pushing in 8 tabs. Plus, you need to remove the case to access the fan.

I found a fan that may work as a replacement if you don't want to get another from Castle or want to have a backup on hand. It's a Novak fan (those other guys) that measures 30x30x6. I measured the stock fan @ 30x30x7. Both take a 5v input. There's one at my LHS that I'll pick up and test fit to make sure.

And like Joe said, do not run it without a fan. Judging by the temps some of us have seen it's just not a good idea.

Link to the fan:
http://www3.towerhobbies.com/cgi-bin...&I=LXMYH6&P=ML

[DRIFT_BUGGY]

Originally Posted by finfin

so if we open MMM's Esc case out , it means wanranty is void, isn't it?

Couldn't other wise CC wouldn't send out replacement fans as the case has to be opened to change the fan.