Sony US26650VT Li-ion Cells - Need More info

Originally Posted by MetalMan

That's good to know! However, at least for my A123 packs, those wouldn't work because many of the copper braid joints are folded in half.

glad you mentioned that because, this is on ebay.
http://cgi.ebay.com/R-C-Battery-Brai...QQcmdZViewItem
so your saying that would work well for assembling packs end to end? Plus it says they are rated 36 amps. Confused a little on how that works. Obviously say a 4 or 6s pack is gonna supply way more than 36amps. but does each cell only put out 1/6 that, If that question makes sense.
What does your average copper bat bar carry amp wise?
Plus on another ? and now we are realy jacking this thread but rather just add to this than start awhole new thread. How would you assemble a 3s2p pack in this https://www.tanicpacks.com/popup_ima...02b9bb555f1d67
configuration. I would do that rather than 2 6s1p config. because my 977 will only charge up to 3s. Plus i can run a 3s2p pack in my other cars and my boat. I know about scriptasylum's site but im confused how to wire them in the 2x2x2 config.