Neu 1515 1y or 2.5d on 5s ? & ESC advice, pure basher.....

No proble with the 1Y on 5s, it
I want to swap my brushless kit in my RC8 buggy and i,ll buy a 5s to put in the buggy, and maybe a 6s

The 1Y is rated for 25 volts, so 22.2volts is not a problem.

Anyways, nobody here run WOT all pack long, you know like me when we drive our truck we drive with short burst of triger all pack long, so the 6s on the 1Y is not an issue

For sure, if i was to buy a brand new motor, i,ll maybe choose the 2.5d if i plan to run on 6s, but i,ve already the 1Y and i,ll run it on 6s[/

Hey, why they have a line on all my words on my previous post

[JERRY2KONE]

Thats weird. I thought maybe you did that to be funny or to cancel whatever you were trying to convey. Looks like somebody is messing with you.

Originally Posted by david lamontagn

Hey, why they have a line on all my words on my previous post

Yep! Maybe somebody don't like my answer

[VintageMA]

Originally Posted by david lamontagn

Anyways, nobody here run WOT all pack long, you know like me when we drive our truck we drive with short burst of triger all pack long, so the 6s on the 1Y is not an issue

Apparently I must be the only one who does and low kv + HV makes for a much happier setup.

Generally I run big fields and huge parking lots and that equates to being WOT a lot of the time.

Originally Posted by VintageMA

Apparently I must be the only one who does and low kv + HV makes for a much happier setup.

Generally I run big fields and huge parking lots and that equates to being WOT a lot of the time.

I do run my rig WOT most of the time and usually not from a stopped position but I will have it rolling first this keeps the amp draw down and its a lot less wear on your drivetrain....