Have MGM worked the bugs out of their controllers yet?

[wallot]

motor braking.
aligns died because muggy was geared for like 60mph and my friend was doing speed runs in grass. some people just dont listen

What did you mean by burning couple aligns??
Excuse me but my english is about at 65%

[TDC57]

Originally Posted by david lamontagn

TDC57, what's your controler who's working on 6s and 8s???? you write 160, but which 160??? 16018?, 16024?

Sorry David,
The 16024 is working great on 6 & 8s...

[TexasSP]

Originally Posted by david lamontagn

What did you mean by burning couple aligns??
Excuse me but my english is about at 65%

He is referring to the align brand motors. Most likely the Align 600XL which is used in the align 600 electric helicopter. Decent motors, but I like my neu better for monster trucks.

My 22418 v3.22 has been working great in my elst running an outrunner. Right now the motor KV is to high for the heavy truck. If you can believe the data logger in the mgm esc its pulling 241amps at full throttle on 4s lipo's.

Thank you guys!!
The only thing i have to do is wait for my e-revo and give a try to my 16018 on 6s

[Finnster]

I'm going to send my 9032 back for the update. Its been nearly perfect for me. The only glitch I had was an occational brake stab, but looks like this has all been resolved. I had swiched to the two spd and man brakes anyway so it didn't matter.

They catch a lot of flak, but the MGMs are really nice IMO. The software needed refining but the hardware it tops. Software is far more fixable than poor hardware design. My esc never got above 110F even on hot days WOT thru long grass in the revo.

[magman]

Does anyone know if the newer MGM controllers have the update already in them?

Originally Posted by magman

Does anyone know if the newer MGM controllers have the update already in them?

Yes they have. Just look at the RcMonster store, and they said in the MGM controller description

[ncalenda]

Am I able to update the firmware myself? Or do I have to send it to MGM? I have the PC USBCOM+ setup.

[ncalenda]

I just noticed this on MGM's website:

http://update.mgm-compro.cz/index.html

Has anyone used this? Looks like you can update the 16018 using this method.

Yeah, you can use this method but your controller needs to be at V3.20 minimum and u need a special cable (cc_03) from MGM. Also your USBcom needs to be at V3.