a little laugh i got

[What's_nitro?]

Originally Posted by lincpimp

I would say skip ramming the truck, and go for his leg...

1515 1y on 6s must be a beast. are you still running the 2 speed? I use the solid center gear, 20/51 gearing, and 4s on the 2300kv KB45 motor. Still runs cool, and the mm is doing fine too. It can get a pair of trakpowers warmer than I like though... I have 4 trakpowers, maybe I should do 2s2p???

If I hit his leg there would be a lawsuit...if I hit his truck I get to watch him cry anyways!

Nah, I have a center spool and the 51T plastic gear, and actually my kit came with the spool. The Neu will get hot if I run until the batteries dump, but everything else is fine. Believe me when I say it has WAYYY TOO MUCH POWER!

I need Mike to make me a 30T pinion (23T there now) so I can put some load on the motor...all the donuts are making me fat.

[lincpimp]

Originally Posted by What's_nitro?

If I hit his leg there would be a lawsuit...if I hit his truck I get to watch him cry anyways!

Nah, I have a center spool and the 51T plastic gear, and actually my kit came with the spool. The Neu will get hot if I run until the batteries dump, but everything else is fine. Believe me when I say it has WAYYY TOO MUCH POWER!

I need Mike to make me a 30T pinion (23T there now) so I can put some load on the motor...all the donuts are making me fat.

Sdp-si have stainless 30t mod1 5mm bore gears... Should run you about 20-22 bucks shipped... They go from 15 to 96t in various sizes.

Do you have a build thread or pics of your gtp?

[What's_nitro?]

Originally Posted by lincpimp

Sdp-si have stainless 30t mod1 5mm bore gears... Should run you about 20-22 bucks shipped... They go from 15 to 96t in various sizes.

Do you have a build thread or pics of your gtp?

Thanks. And here it is. http://www.rc-monster.com/forum/show...t=10973&page=5

I don't think I need to tell you, but I've hijacked this thread too much already so lets talk in the next room.

[lincpimp]

Originally Posted by What's_nitro?

Thanks. And here it is. http://www.rc-monster.com/forum/show...t=10973&page=5

I don't think I need to tell you, but I've hijacked this thread too much already so lets talk in the next room.

Gotcha, I posted in your thread...