My BL muggy conv.

[roweder]

where?

[lincpimp]

Someone here made a mount that placed the brake servo directly behind the center diff. He used a small high torque servo.

[roweder]

Originally Posted by lincpimp

Someone here made a mount that placed the brake servo directly behind the center diff. He used a small high torque servo.

mine really looks like if i did that then there wouldn't be enough room to put the battery there, but now i can put it a little close to the middle of the chassis.

[roweder]

Done the servo mount!

I did this without a countersunk bit:

[roweder]

With the brake servo where the fuel tank used to be, and the motor where the radio box used to be and the battery where the engine used to be, not only will I have better weight balance, but i also have 164mm of space for the battery! I used to have 140mm! plus the protek battery is only 134mm long!

[Mozzy]

Originally Posted by lincpimp

Someone here made a mount that placed the brake servo directly behind the center diff. He used a small high torque servo.

Do you know what servo they used? I'm looking for a mini servo that can push at least 5kg for my brakes.

Good work on that servo mount too young fella, it looks very profesh.............from the top.

Don't worry about the bottom as nobody's going to see it at 50mph & it'll get scratched to the crapper anyway.

[roweder]

Originally Posted by Mozzy

Don't worry about the bottom as nobody's going to see it at 50mph & it'll get scratched to the crapper anyway.

It's not that important that the screws don't get scratched, i just don't want them to be sticking out enough that they get knocked hard enough to break.

[roweder]

I backordered the Mamba Monster 2200kV combo today!