New MGM controllers (up to 15s!)

[BrianG]

Well, I blocked that polite jab and countered with a not-so-polite kick to the genitals.

Generally, voltages that high negate the need for such high currents because most people get high turn motors to go along with it. Unless of course, you want a couple of these for your personal 1:1 vehicle.

[TexasSP]

Originally Posted by BrianG

Well, I blocked that polite jab and countered with a not-so-polite kick to the genitals.

Well while you were at work I sneaked in your house and put fans on all of your ESC's!

The problem in Houston, is that with temps going over 100 very often and the humidity, I like to have extra air flow to aid in the cooling process. Just call it an extra insurance policy.

Funny story but true: When I was working with Baldor on putting new motors and control systems on my CNC machines, forced cooling came up. I do not remember the exact figures but with forced cooling on the motor and added cooling to the controller we could get about 25-30% more power from the system. This was all covered under warranty as well. It wasn't necessary in the beginning of the project but was in consideration for some future builds. I wanted all parts on all machines to be as interchangeable as possible so I could keep less spares (save money) and their systems made it work.

[BrianG]

Originally Posted by TexasSP

Well while you were at work I sneaked in your house and put fans on all of your ESC's!

Nope, just checked and they're all still sans fan. Maybe my vehicles rejected the fans when you left.