Looking for ideas, suggestions, etc...

[satan'struck]

receiver is Futuba PCM 1024, and the ESC is MGM 16018...about the manual, i'll try to post the link for you, but if you didn't hear from me with a day or two, i guess the best place to look at is the Xray Web Site under manual (i believe they got the manual for the xt8), thanks alot!
P.S. i just checked and seems like you'll have to go to their site and look under downloads...

[lincpimp]

Originally Posted by satan'struck

receiver is Futuba PCM 1024, and the ESC is MGM 16018...about the manual, i'll try to post the link for you, but if you didn't hear from me with a day or two, i guess the best place to look at is the Xray Web Site under manual (i believe they got the manual for the xt8), thanks alot!

Ok, a good general purpose receiver box is the old nitro tmaxx box, howver the new erevo box looks great and it sealed. May not fit a big receiver though. I do have an mgm esc, and will look at it a bit to see how to mount it...

I will look into the xray 2 speed too.

[jayjay283]

Tower sent me 2 of those emaxx/erevo diffs, pretty sure I was only charhged for 1
, so send me the $3 ship 1s yours to laugh at but its goes in the tranny, not excited all,, Slipper !

[satan'struck]

hey lincpimp, thanks alot for all your help and will wait for your good new...oh, btw, if you got a rough idea, could you let me know how much are they and the S&H to Hong Kong if possible, thanks again, best regards, samsam...

[lincpimp]

Originally Posted by satan'struck

hey lincpimp, thanks alot for all your help and will wait for your good new...oh, btw, if you got a rough idea, could you let me know how much are they and the S&H to Hong Kong if possible, thanks again, best regards, samsam...

Sorry satan, not following you. What do you want a price on?

[satan'struck]

well, about that price issue.... cause i'm just hoping that you're able to make something like that cause you guys got all kinds of tools and equipments, and if you're able to do that, you'll be able to sell it...i know that you might not have any time for that, and i would say that this only a HOPE for me since in Hong Kong i can't get anything like that at all!!! main thing is that even Mike don't have anything like that.....

[t-maxxracer32]

Originally Posted by satan'struck

well, about that price issue.... cause i'm just hoping that you're able to make something like that cause you guys got all kinds of tools and equipments, and if you're able to do that, you'll be able to sell it...i know that you might not have any time for that, and i would say that this only a HOPE for me since in Hong Kong i can't get anything like that at all!!! main thing is that even Mike don't have anything like that.....

he has talked about numerous things in the thread.. which one are you looking to get a price for?