Losi 8t Tekno V3 build process pics - RC-Monster Forums

BL_RV0 · 10.15.2008, 08:32 AM

You must have shelled out some dough to build that one!! So you're running a 1512 on it? Don't you think its too small?

Ryu James · 10.15.2008, 09:27 AM

Quote:

Originally Posted by BL_RV0

You must have shelled out some dough to build that one!! So you're running a 1512 on it? Don't you think its too small?

yeah, i told my wife that i spent $100.

if she really knew she would shit her panties. haha. it never ends.

i have a 1512 1.5d and a 1515 1.5D. i am not sure which one i will run yet but i had the 1512 in my buggy and then threw in the 1515 and the 1512 is a lot faster. that is on a 4s too. so what i am thinking is i am going to throw the 1512 back in the buggy on 4s and throw the 1515 into the truggy on 5s. that puts both motors right at 50k rpm. i just want to try the 1512 on 5s once. that will be 62k rpm. and no, it is not too small. these motors rip. look at my other thread about 4s and 5s on neu motors. there are a lot of posts there from guys that use the 1512 for their revos and truggies and they are fast from what it sounds like.

BL_RV0 · 10:14 AM

True, but seems like temps would get out of hand with that setup. The 1515 1.5d on 4s is your best bet.
Do you have interference problems with the RX next to the ESC?

Ryu James · 10.17.2008, 04:44 AM

Quote:

Originally Posted by BL_RV0

True, but seems like temps would get out of hand with that setup. The 1515 1.5d on 4s is your best bet.
Do you have interference problems with the RX next to the ESC?

i havent noticed any interference issues. seems fine.