6x6 maxx based crawler

[brushlessboy16]

For your adjustable suspension, May be a long shot but put the upper shock mounts on really strong servos and adjust from there, so you could have different heights on each side, if you use a 6 channel radio, you can put the "airride" on one stick to adjust and driving on the left. lockers on the flap or smoke switch

[lincpimp]

So I am getting there. Finished the center skid, greased the front and center diffs, and attached all of the suspension I currently have built. I need to scare up another 3.3 diff case for the rear. And one more steering bellcrank post that is hiding somewhere.

I also need to space the johnson motors back a bit, as the shafts are too short to fit the pinions backwards. I may end up using some titans, as they will fit without mods.

Yes, the rear chassis is red, I got it in trade with a bunck of parts, and it appears to be the only other emaxx tranny I have left... I guess I cut up all of the others to make battery trays... I will order another chassis when I make my next order, so for now it will have to do.